Light Gray Primer-Surfacer airbrush ready
Light Gray Primer surfacer

Gravity Colors Light Gray Primer-Surfacer – GC-320
Primer-surfacer with excellent etching properties on metals, plastic and resin, with very good filling properties.
Ready to spray, no activator (hardener) needed for this primer.

Net volume:
1.2 fl.oz/35ml Gray primer – GC-320

$6.95

SKU: GC-320 Category:

Product Description

Gravity Colors Light Gray Primer-Surfacer – GC-320

Directions:

Avoid spraying heavy coats of primer on bare plastic. The goal is to build up the primer surface from thin layer coats. Recommended air pressure is 15-20 PSI.
Gently wet sand the primed surface with a 4000 grit sandpaper to achieve the smoothest surface possible. Remember, the smoother your primed surface is the better result you will get with your base-coat and clear coat.

Ready to spray from the bottle with an airbrush. Sand surface after primer completely dried.
DO NOT USE NEAR HEAT, SPARKS OR OPEN FLAME!
Use in well ventilated area. Tighten cap securely after each use.

Additional Information

Weight 3 oz
error: