Gravity Colors 2K White Surface Primer – GC-304
(4 part primer, 1 part activator)
Avoid spraying heavy coats of primer on bare plastic. The goal is to build up the primer surface from thin layer coats. Recommended air pressure is 15-20 PSI.
Gently wet sand the primed surface with a 4000 grit sandpaper to achieve the smoothest surface possible. Remember, the smoother your primed surface is the better result you will get with your base-coat and clear coat.
Ready to spray from the bottle with an airbrush. Don’t forget to mix 4 parts primer with 1 part activator! Sand surface after primer completely dried.
DO NOT USE NEAR HEAT, SPARKS OR OPEN FLAME!
Use in well ventilated area. Tighten cap securely after each use.